Yamaha YZF-R7 Forum banner

Shorty Brake Lever

4577 Views 8 Replies 6 Participants Last post by  theicewall
Get em before they sell out. Ships UPS Express to states. Got mine in 3 days from Austria to SoCal. No freeplay or slop on lever. Used 7mm & 5/8 socket to press out and only 7mm to press in.

Automotive tire Automotive lighting Tire Motor vehicle Automotive design

Tool Hand tool Gesture Wood Finger

Vehicle Hood Automotive tire Motor vehicle Automotive lighting

Guitar accessory Road surface Art Font Asphalt

Wood Tool Bumper Gas Composite material
See less See more
5
  • Like
Reactions: 1
1 - 9 of 9 Posts
Oh man this is so good to know, cause I ordered both of their levers for the R7. They should be here tomorrow.
  • Like
Reactions: 2
Oh man this is so good to know, cause I ordered both of their levers for the R7. They should be here tomorrow.
Yeah fits so well. Let me know how it goes.
Get em before they sell out. Ships UPS Express to states. Got mine in 3 days from Austria to SoCal. No freeplay or slop on lever. Used 7mm & 5/8 socket to press out and only 7mm to press in.

View attachment 826
View attachment 827
View attachment 824
View attachment 828
View attachment 825
Looks great Mike!! Thanks for sharing!!
Here are some pics how I pressed out the sleeve from old and pressed into new. Again, I used a 7/8 & 7mm socket.

Tool Automotive exterior Bullet Sports equipment Gas
Motor vehicle Gas Engineering Machine Auto part
Product Gas Motor vehicle Auto part Machine
See less See more
3
  • Like
Reactions: 1
Youtube said he had to drill out his to get the pin reinstalled flush. Anyone else?

  • Like
Reactions: 1
Youtube said he had to drill out his to get the pin reinstalled flush. Anyone else?

I didn't have to drill anything for brake lever install. Not sure why his pin didn't fit.

If you want more details email the sales director from MG Tec. Really nice guy and responsive. I had the first lever from the first batch and it fit like a glove. I can't imagine them changing designs, already mentioned to MG that it fit perfect. I just needed to press the pin out from old and in the new lever.
Email of Vincent below:



Von: Vincent Smaal <[email protected]>
Gesendet: Donnerstag, 10. Februar 2022 11:07
An: 'mikee1216
Betreff: AW: Receipt for Your Payment to MG Biketec GmbH
You will however be the 1st person worldwide to receive a MG Biketec R7 lever set 😉

Greetings,

Vincent Smaal
See less See more
  • Like
Reactions: 1
I didn't have to drill anything on mine either.
  • Like
Reactions: 1
The R7 seems to be the only one that is only offered in black and the other applications seem to have anodizing choices. Weird.
1 - 9 of 9 Posts
Top