[SethTylerG44]

Hello everyone. I saw a thread on here to buy the yoke bolt to be able to use the quad lock on the R7. I finally received mine and went to install it today and the nut is too big for the Bolt. But I see everyone else using it just fine. Am I missing something? Did they possible send me the wrong size bolt? The order receipt reads the M22 but possibly a mistake? Any help would be great

 

[Vansmack]

That’s the right size, M22 x 1.0. Maybe they shipped the wrong one.

 

[T3B]

Did you remove the factory cap? That nut goes in its place

 

[Jyagoo]

Hey, send a picture of what your reference to ?

 

[T3B]

Hey, send a picture of what your reference to ?

you need to remove this cap before the bolt will fit

 

[SethTylerG44]

Did you remove the factory cap? That nut goes in its place

Yes lol the new nut just slides over the threads. I am calling probolt tomorrow when they open and I’ll let you guys know what happens. The bolt they sent me measure 28mm though

 

[SethTylerG44]

Yes lol the new nut just slides over the threads. I am calling probolt tomorrow when they open and I’ll let you guys know what happens. The bolt they sent me measure 28mm though

And is advertised as 22mm and the shipping receipt says 22mm

 

[Jyagoo]

Hey y’all I believe I’m having the same issue as well. Because I had to buy 2 different sockets to take the original nut off, then had to buy another socket to put the new pro bolt nut on. I might have to send mines back too,
Pro Bolt sent me: Yoke Nut M22x( 1.00mm Open)

 

[SethTylerG44]

Hey y’all I believe I’m having the same issue as well. Because I had to buy 2 different sockets to take the original nut off, then had to buy another socket to put the new pro bolt nut on. I might have to send mines back too,
Pro Bolt sent me: Yoke Nut M22x( 1.00mm Open)

I do know the two bolts have different outside dimensions. But I called pro bolt and they are sending me a replacement and he said he double checked it