[Smallchanceofdying]

I just got a r7 and I stripped the bolt that goes into the shift rod link. I was trying to uninstall the normal shift rod to install the GYTR quick shifter but I can't get the bolt out now. The part is 90111-06098-00 and I need the specs of that button bolt to run to ace or something, Yamaha parts shopping feature is down. Also any ideas on how to get it out?

 

[romydgreen]

You'll have to carefully drill the head off. It looks like it was made of cheese so should be fairly easy to do. I'd use a battery powered drill on a slow speed. I'd also wrap the surrounding area with as much rag or some such as possible in case you slip off the button head when drilling it.

 

[Evill_Ed]

Get a Torx socket that is just slightly larger than the hex opening and tap it into the hex opening with a hammer. The Torx splines will bite into the metal and you should be able to remove the bolt.
*Note: I would remove the shift arm and lay it on a solid surface to tap the Torx bit into it.

Ed

 

[Smallchanceofdying]

You'll have to carefully drill the head off. It looks like it was made of cheese so should be fairly easy to do. I'd use a battery powered drill on a slow speed. I'd also wrap the surrounding area with as much rag or some such as possible in case you slip off the button head when drilling it.

Thanks for the idea😁

 

[Smallchanceofdying]

Get a Torx socket that is just slightly larger than the hex opening and tap it into the hex opening with a hammer. The Torx splines will bite into the metal and you should be able to remove the bolt.
*Note: I would remove the shift arm and lay it on a solid surface to tap the Torx bit into it.

Ed

I will try that, I wish they didn't put so much locktite on the damn thing especially when they know people are gonna change it out😂

 

[Evill_Ed]

I will try that, I wish they didn't put so much locktite on the damn thing especially when they know people are gonna change it out😂

Heat the threaded portion with a heat gun to soften the locktite.
Ed

 

[sparky80]

y'all making this too hard.... get a pair of vise grips and that should come out fairly easily

 

[Twiztidr7]

Or better yet, cover the bolt back with the cover, undo the 10mm bolt at the shift linkage to the right, undo the jam nut and unscrew it from the shift rod, you reuse that heim joint anyways. Just saying.

 

[cballer98]

You could also use a dremel and cut a flathead size line into the top of the bolt and use a flat head screwdriver to take it out, has worked plenty of times for me!

 

[Smallchanceofdying]

y'all making this too hard.... get a pair of vise grips and that should come out fairly easily

Yea i tied it down to my metal shelf and drilled into the bolt but ended up with the shift arm in my wall so i just ordered a new one i give up…