Yamaha YZF-R7 Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Looking for a link or someone to direct me where to get a slip on exhaust for my 2022 R7 .. did the fender eliminator and frame sliders .. I know you need a ecu flash if you replace the whole thing so I'm jus looking for a slip on now thanks fellas
 

·
Registered
Joined
·
70 Posts
What would you attach a slip-on to? You thinking about sawing it off just behind the O2 sensor? The older stock FZ/MT system had full length headers to work with.
 

·
Registered
Joined
·
22 Posts
There really isn't a slipon option, unless you want to cut the exhaust. You're better off just getting a whole system. If you want something now, look for MT07 exhaust. It's the same motor and bolts right up. Some systems seem to need a slight mod to the curb side rear set but one like mine that doesn't exit quite so high, no mods needed.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #4 ·
There really isn't a slipon option, unless you want to cut the exhaust. You're better off just getting a whole system. If you want something now, look for MT07 exhaust. It's the same motor and bolts right up. Some systems seem to need a slight mod to the curb side rear set but one like mine that doesn't exit quite so high, no mods needed.
If you do a hole exhaust don't you need a ecu flash or somn that isn't available to do yet ? I'm confused on the whole thing I added a slip on to my old bike 2020 r3 but I can't find anything for this bike yet really besides the fender eliminator and such .. I could be jus looking in the wrong places
 

·
Registered
Joined
·
22 Posts
If you do a hole exhaust don't you need a ecu flash or somn that isn't available to do yet ? I'm confused on the whole thing I added a slip on to my old bike 2020 r3 but I can't find anything for this bike yet really besides the fender eliminator and such .. I could be jus looking in the wrong places
An ecu flash is recomended & would be something you should do eventually but it's not like the bike is going to spontaneously combust like some people make you believe if you don't do it. You'd be fine running the exhaust as it is, you just might not get all the power out of it that you will if you flash. If you change the airbox out w it, then you'd really want to flash.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #6 ·
An ecu flash is recomended & would be something you should do eventually but it's not like the bike is going to spontaneously combust like some people make you believe if you don't do it. You'd be fine running the exhaust as it is, you just might not get all the power out of it that you will if you flash. If you change the airbox out w it, then you'd really want to flash.
Ok so there really isn't no risk if I do it with out a flash for now ? .. im jus not tryna mess it up love the bike jus not loud enough for me tbh lol.. I wanna do stuff to it but not much out for it just yet
 

·
Registered
Joined
·
22 Posts
Ok so there really isn't no risk if I do it with out a flash for now ? .. im jus not tryna mess it up love the bike jus not loud enough for me tbh lol.. I wanna do stuff to it but not much out for it just yet
The bike will be just fine. The lack of parts definitely sucks but that's the joy of having a brand new model I guess. A lot of MT07 parts fit, especially engine parts so you can look at things like that.
 
1 - 7 of 7 Posts
Top